Tag Archives: Thesis Defense

Kaitlin and Mike successfully defend their PhD Proposals

Two PhD students, Kaitlin Wozniak (Optics) and Michael Echter ( Mechanical Engineering), have successfully defended their PhD proposals, outlining the scopes of their respective research to finalize their degrees. Kaitlin’s proposed work is on Properties and Safety of Femtosecond Photo-modification in Hydrogel and Cornea as part of the IRIS: Intra-tissue Refractive Index Shaping program at the University of Rochester. Mike’s work is on Composite Laminate Characterization and Piezoelectric Actuator Testing for
the Design of a Precision, Adaptive, High-Strain Composite Hinge, working with the MIT Lincoln Laboratory. Congratulations to both!

Xiangzhi Yu successfully defends PhD!

xiangzhi-yu-defense_1Xiangzhi Yu, Mechanical Engineering PhD student, has successfully defended his PhD work entitled Multi-Degree of Freedom Optical Metrology Techniques. Xiangzhi is the second student graduate with his PhD from the group. After graduation, Xiangzhi will head to FARO where he has accepted a position as a Senior Systems Engineer. Congratulations and good luck on the next step in your career!

Mike Ricci successfully defends his MS Thesis

Mechanical Engineering MS student Mike Ricci successfully defended his MS Thesis. His work, Opto-Mechanical Design of a Three-Degree-of-Freedom Homodyne Interferometer for Freeform Optics Metrology, was part of research within the Center for Freeform Optics. His thesis, once finalized, will be available for viewing under the downloads section.

Mike is now off to Quartus Engineering to work on opto-mechanical design for the aerospace industry. Congratulations Mike and we wish you all the best!

Steve Gillmer successfully defends his PhD research!

Steve Gillmer successfully defended his PhD Thesis, Resolution and Functionality Enhancements in Optical Metrology, this past semester. Steve has worked hard over the past few years and has broadened his expertise to metrology, instrumentation, signal processing, and controls. Steve’s thesis can be accessed on the Downloads page. Steve is off to MIT Lincoln Laboratory and we wish him all the best.

Steve Gillmer PhD Defense

Steven Gillmer, MechE PhD Student, will be defending his PhD work on Tuesday, April 26th at 10:00 AM. The defense will take place in Hopeman 224, in the MechE Conference Room.

Title:
Resolution and Functionality Enhancements in Optical Metrology

Abstract:
Scientific experiments continue to push engineering limits beyond the nano-scale, driving the development of extremely high resolution measurement tools and calibrations as a result. The effective implementation of optical metrology and its associated instrumentation involves a multi-disciplinary approach. This thesis draws from mechanical, electrical, and optical engineering subject areas in order to implement the proposed resolution and functionality enhancements. The discussion will focus on three forms of optical metrology: optical displacement sensing, scatterometry, and interferometric weak measurements. The primary applications of the advancements in optical displacement sensing lie in the measurement and calibration of computer numerical control (CNC) equipment and coordinate measuring machines (CMMs). A novel scatterometry tool will be presented for critical-dimension metrology in the continued sustenance of Moore’s law. Finally, optical displacement sensing and scatterometry will find parallels through weak measurements. Both application areas have potential for vast performance improvements via the measurement of a weak value. A variety of novel concepts and experiments will be presented within these fields of research with the ultimate goal of their dissemination into the manufacturing and semiconductor industries.

Sam Butler successfully defends his MS Thesis

Sam Butler successfully defended his MS Thesis, Development of Electronics and Signal Processing for a Displacement Measuring Interferometer Probe for Freeform Optics, on April 14th. Sam’s committee consisted of his advisor, Professor Paul Funkenbusch (MechE), and Professor Qiang Lin (ECE).

Sam has recently accepted a position as a System Engineer at Clerio Vision, Inc., a startup company spun off from the University of Rochester and the labs of Prof. Ellis, Knox, and Huxlin. We wish Sam congratulations and all the best in the future!

Sam Butler defends MS Thesis Today!

Mechanical Engineering MS student, Sam Butler, will defend his MS thesis work on Thursday, April 14th at 3 PM in the Hopeman 224 conference room.

Title:
Development of Electronics and Signal Processing for a Displacement Measuring Interferometer Probe for Freeform Optics

Abstract:
The burgeoning field of freeform optical design is currently limited by metrological techniques for validating manufactured designs. State-of-the-art measurement systems do not provide the flexibility, measurement bandwidth, or low measurement uncertainty required for producing freeform optics of the same quality achievable for spherical and aspheric parts. One promising avenue for reaching high-quality metrology is through the use of optical coordinate measuring machines (OCMM). These are 5-axis probing machines that use non-contact, optics-based probes for surface measurement. This research seeks to develop an optical probe with high measurement bandwidth and low measurement uncertainty in a compact form factor that provides linear and angular measurement of the optical surface under test. The probe uses homodyne interferometry in a Michelson configuration for linear displacement sensing, and a lens in combination with a position-sensitive detector in an autocollimation capacity for angular displacement sensing. Development of electronics and signal processing, as well as preliminary measurement results using a prototype probe, will be discussed.