Posts categorized CHE Archive

Authors Mentor Prof. Mark Juba Sponsor Dr. Brian Cleary Abstract The objective of this project is to develop a continuous system for producing high-value p-toluidine. This system utilizes a nitroarene…

Ammonia Biofilter Optimization for Chicken Manure Composting Authors: Geoffrey Doyle, Jason Maher, and Aidan Shea Advisor: Professor Kelley ​ Department: Chemical Engineering Sponsor: Hal Kreher, Kreher Farms Introduction Kreher Farms is…

The diffusion of carbon dioxide into Zeolite 13X is evaluated through three methods: a TGA, an AutoChem II, and a PBR coupled with a TCD.

Authors Mentors Mitch Anthamatten and Melodie Lawton ( Department of Chemical Engineering) Abstract The crystallization speed of a polymer can be a limiting step in the production of products. The…

Author Mentor Katlyn Conway and Professor Griffin Abstract Plug Power’s internal R&D lab lacks the space for full-scale coating and drying equipment. Their current drying process involves a 480 ft/min…

This project aims to build and design a continuous concentration measurement system for a low-volatile monomer in the vapor phase.

Ticklers prevent heel formation from occurring and allow for most, if not all, material to drain through the tank. The goal of this project is to design a system to test different tickler impeller configurations to optimize slurry draining performance.

The purpose of this project was to identify and optimize factors for a continuous reactor that can be used to prepare aryl amines from nitro arenes using an acid/proton donor system and a heterogeneous palladium catalyst.

This project explores the effects of an iodine based etchant on the etch rates of both electroplated and sputtered gold coated silicon wafers.

Team Stonefish researched novel treatments for inhibiting post-canning refermentation in sweetened beer, which can cause profit loss and recalls.

Investigating the use of biochar made from woody yard waste stored in the Waste Management landfill in Fairport, NY as a PFAS removal treatment for the landfill leachate

In order to decrease costs of NoWave’s cannabis extraction process, methods were investigated to increase yield and allow for more reuse of the ethanol

This project explores the most effective foam fractionation system for PFAS removal from landfill leachate.

One or two sentence description of the project.

One or two sentence description of the project.

Hemp composites are a sustainable alternative to carbon fiber and fiberglass composites. Our team has developed a manufacturing process and testing procedure to characterize hemp composites.

One or two sentence description of the project.

A process developed by Xerox results in a waste stream of heptane and polydimethylsiloxane (PDMS). The team built and tested a semi-continuous extraction system to separate heptane and PDMS.

One or two sentence description of the project.

This project involved designing, building, and testing the functionality of an adsorption system. The system will be used by the Porosoff Lab to study different sorbents for use in the direct air capture of CO2.

One or two sentence description of the project.

One or two sentence description of the project.

Students can study heterogeneous catalysis reactions with a continuous reactor

One or two sentence description of the project.

Proposed by SPX Flow, the goal of this project is to characterize the oxygen transfer rate (OTR) within inert fluids of various viscosities.
Paul Eisold, Kamal Raji, Rony Waheibi, Collins Yawe

This Xerox-sponsored project aims to completely separate high viscosity PDMS and heptane via a solvent evaporation process followed by supercritical carbon dioxide extraction.
Alissa DeRubertis, Colin Ikei, Bryan Schellberg, Mark Volkin

This project, sponsored by Waste Management, is interested in comparing two methods for the removal of PFAS from landfill leachate, foam separation and activated carbon adsorption.
Justin King, Ashley Sibanda, Claire Wilson

The URMC Kidney Model Optimization Project aims to create a polymer material that can simulate the human kidney for practice by surgical residents.
Bimpe Isafiade, Harshita Mahaseth, Natalie Ramesh, Baris Eser Ugur

This project aims to characterize a wastewater stream in addition to addressing biochemical oxygen demand in cooperation with LiDestri.
Katerina Connor, Junseok Jeon, Connor Pope, Brian Yegela

This project was to design an accelerated testing system for Harbec, Inc to evaluate gaskets in the India Mark II hand pump for installation by the Ugandan Water Project.

Dan Allara, Oion Akif, Paul Irving, Tessa Ludwick