3. Programs Archive

The Children's section at the Pittsford Community Library has three main spaces for play. While the two-spaces, located on the main level, are well defined and engaging for children with interactive elements, the project was to create a new interactive display for the third space located on the upper level.

The project aims to design a steering system for robots used in various ECE courses. The robotic system has issues with lifetime, maneuverability, and mobility. The new model was designed with an aim to direct most of the off-axis load into the chassis while still maintaining the capability of the DC motor driving the wheel. These improvements helped in significantly increasing the lifetime of the motors. Additionally, the ability to steer each wheel independently increased the mobility of the robot.

In response to the COVID-19 crisis, we are developing a mask that offers superior function in a fraction of the manufacturing time when compared to many emerging 3D printed mask designs. The design offers an improved seal around the face that is more comfortable, a more robust/airtight filter housing, autoclavable materials, and a quicker manufacturing method. This will allow local and national entities looking to produce DIY masks a better, faster alternative to 3D printing.

To create a device that is minimally invasive that will be used to measure a patient's blood composition (hematocrit and blood plasma) using electrochemical impedance spectroscopy to track changes in blood volume.

With much of the world adopting a heightened focus on environmental stewardship, an increasing number of people have turned to the bicycle for transportation. However, current bikes often lack versatile accessories to make them effective in situations other than simply commuting between locations. In order to make bikes more viable for everyday uses, they need to be fitted with ancillary components. This project involves the design of a multi-purpose, dividable trailer that can be attached to an adult bicycle.

The Rochester Museum & Science Center asked for help designing an interactive exhibit to honor Georgena Terry. The team designed a stationary bicycle where the saddle and the handlebars move in the vertical and horizontal direction with motors. A system was designed in order to determine and display the power output from the rider. When on the bicycle, the rider can fluidly adjust the bike geometry and be able to see how changing each dimension affects the power they produce.

Optimize creation of composites combining under-utilized hemp fabrics with epoxy.

Digital wavetable synthesizer; allows for 2-second user recordings to be used as custom oscillator sources. All DSP run on a SHARC chip, external controls via an Arduino.

Ten-μ solutions plans to introduce time and cost savings to the operating room (OR) through application-specific single-use instrumentation. Our instrument will allow surgeons to position and tension vessel loops at their discretion.

Using a rope of LEDs, connected to a Raspberry Pi with our software, we will read the audio signal from an HDMI cable and display colors on the LED strip that match the tone of the music. . The goal of our project is to be able to create a visualization to convey a similar feeling to people that are unable to hear the music.

The MRS is a specimen retrieval device that offers surgeons a way to remove malignant specimens during laparoscopic procedures without significantly widening minimally invasive incisions. The proposed device would use expandable braided sleeving to elongate and radially compress large tissue specimens for extraction through the initial incision. Use of this device would allow surgeons to remove large tissue samples through smaller incisions to reduce patient pain, recovery time, postoperative pain and length of hospital stay.

Identify Near Infrared transparent polymers to simulate human tissue for surgical training applications at UR Medical Center.