admin

Hutchison Hall is home to the Biology department. However, there's a lack of understanding regarding all research undertaken by the department. Hanging physical models can bring exposure to the department and create a vibrant and joyous community inside the Hutchison Hall. ​ The Eurypterid Team's models are designed to represent the Jaekelopterus, a genus of the Eurypterid species. These models will be about 9 feet in length. The motorized tail and claws will be triggered through infrared motion sensors. ​

We are designing a device that will provide a cost-effective method for characterizing whether a particle in water is a plastic or nonplastic, as well as categorizing the subtype of plastic. The device will need to be effective on a scale of approximately one to five microns, which is the size of the microplastic particles.

Minimize nickel contamination of cleaning tanks in Orafol Precision Technology's electroforming process.

Limit entry of abrasive sediment into India Mark II handpump for Ugandan Water Project.

The AI Sorting System takes a photo of a recyclable object, weighs it, and scans it with a metal detector. It inputs this data into a program that classifies the item as plastic, metal, or glass. The system includes 3 bins, one for each material. LEDs will light up on one of the bins and its lid will flip open, indicating that the recyclable should be placed in that bin.

A mounted secondary mirror of space telescope is designed to optimize wavefront error, mass, and dynamic response for launch survival and on-orbit performance. Additionally, the mirror's behavior during launch, deployment, and operation in near subzero temperatures is analyzed.

A renewed focus on environmental concerns means that fuel efficiency and emissions of engines are of significant importance. A current design for a mixing nozzle exists, but the fuel residence could be higher and the pressure drop could be lower. A longer fuel residence time ensures smooth distribution of fuel and a more efficient burn. A lower pressure drop means that less energy is lost by the motion of the fluid through the mixer.

Helmets in the NFL are not effective enough to safeguard the health of the players. Players sustain concussions which can not only bench them, but leave life-long brain damage from the accelerations experienced during impact. As part of the project to improve the helmet, simulations were used to test material properties of different components of football helmets, such as hard foams, soft foams, and the shell. Data from the simulations were analyzed with performance metrics provided by the NFL.

After a total knee arthroplasty (TKA) surgery, some patients experience infection at the surgical site. This infection is often associated with the formation of bacterial biofilm, and in order to treat this, the surgeon must remove and replace the implant with the risk of reduced mobility and bone fraction. Our project is to develop a medical device to eradicate the biofilm without the necessity to remove the orthopedic implant.

This product is intended to be used by music producers/recording engineers as a simple instrument within a digital audio workstation. It entails programming a virtual instrument (synthesizer) in the C++ based programming environment, JUCE by utilizing wavetable synthesis. The synthesizer is meant to provide the user a basic virtual instrument with the ability to upload custom wavetables, and which includes integrated effects which can be modulated & controlled dynamically in real time.

The Children's section at the Pittsford Community Library has three main spaces for play. While the two-spaces, located on the main level, are well defined and engaging for children with interactive elements, the project was to create a new interactive display for the third space located on the upper level.

The project aims to design a steering system for robots used in various ECE courses. The robotic system has issues with lifetime, maneuverability, and mobility. The new model was designed with an aim to direct most of the off-axis load into the chassis while still maintaining the capability of the DC motor driving the wheel. These improvements helped in significantly increasing the lifetime of the motors. Additionally, the ability to steer each wheel independently increased the mobility of the robot.